Our new innovation of Friction welded Induction Hardened Drill rods on jan 16 2009 as a first company in India.




Our new innovation of Friction welded Cold Hardened Drill rods on jan 16 2009 as a first company in India.



Imported new machineries from Taiwan.

Drilling Rigs

Tools & Accesories

Hole Openers (API Certified)

Drill Rods/Casing/UPVC Pipes

Friction Welded Drill Rods

UPVC Pipes

Drill Rods (API Certified)

Hand Pumps

Mobile Water Treatment Unit

Water Purifier

Block Making Machine

Stone Crushes

Farm Equpment Division

Core Drilling Rigs

CORE cum DTH / ROTARY DRILL RIG CDR 400/CDR 700 CDR 1500

waterwellrigs CDR 700 CDR 1500

Description	Models
	CDR 400		CDR 700		CDR 1500
Drilling Capacity:	NQ 400 mtrs 0 to 45º	DTH/ROTARY 200 mtrs ---	NQ 700 mtrs 0 to 45º	DTH/ROTARY 450 mtrs ---	NQ 1500 mtrs 0 to 45º	DTH/ROTARY 1000 mtrs 111
Angle Hole Drilling	(Under Favourable Drilling Condition)
Mast: Type of Construction Centraliser opening Rotary Head Travel Rod Handling Capacity	Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs		Sturdy Structural Box 300 mm 7.0 mtrs 6 mtrs		Sturdy Structural Box 457 mm 10.0 mtrs 9.0 mtrs
Rotary Head: (Speeds & Torques) Speed I, Torque – I Speed II, Torque – II Speed III, Torque – III Speed IV, Torque – IV	Speeds – Torques 600 – 55 Kg-m 125 – 250 Kgm ……………….. ………………..		Speeds – Torques 900 – 70 Kg-m 500 – 125 Kg-m 185 – 340 Kg-m 103 – 608 Kg-m		Speeds – Torques 1000 – 100 Kg-m 625 – 160 Kg-m 160 – 620 Kg-m 100 – 1000 Kg-m
Feed System: Pull up Force (Max.) Full down force (Max.) Rapid Speed (Up)	7363 Kgf 5054 Kgf 20 m/min		16,500 Kgf 10,000 Kgf 20 m/min		35000 kgf 13500 kgf 23 m/min
Hydraulic System: Max. Operating pressure Filtration (Nom) Tank Capacity	200 bar 10 microns 750 ltrs		225 bar 10 microns 800 ltrs		230 bar (open loop) 300 bar (closed loop) 10 microns 800 ltrs
Prime Mover: Input Drive	Driven by Suitable Diesel engine		Driven by Suitable Diesel engine		Driven by Suitable Diesel engine
Levelling Jacks: Qty Cylinder Bore X Stroke	4 Nos. Ø 125 mm X 610 mm		4 Nos. Ø 125 mm X 610 mm		4 Nos. Ø 125 mm X 610 mm
	(System Consists of Reverse flow Restricted Valves)
Main Hoist: Bare drum Pull Bare drum speed Drive Cable Diameter	5000 Kgf 40 mtrs/min Hydraulic Motor 16mm		10,000 Kgf 30 mtrs/min Hydraulic Motor 16mm		15,000 Kgf 40 mtrs/min Hydraulic Motor 22mmf
Mud Pump: Max. Flow Max. Pressure Drive	75 LPM 32 Kg/cm² Hydraulic		107 LPM 38 Kg/cm² Hydraulic		149 LPM 45 Kg/cm² Hydraulic
Wire Line Winch: Bare drum Pull Bare drum speed Drive	480 Kgf 60 mtrs/min Hydraulic Motor		1000 Kgf 100 mtrs/min Hydraulic Motor		2000 Kgf 150 mtrs/min Hydraulic Motor

Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications.
GETECH Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

TRACTOR MOUNTED HYDRAULIC RIGS

CORE HOLE DRILLING BLAST HOLE DRILLING BOREWELL DRILLING

waterwellrigs TRACTOR MOUNTED HYDRAULIC RIGS

GETECH's Hydraulically operated Tractor Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Tractor engine is operated by fixed displacement pumps, which regulates, rotary head speed, feed etc., Centralized control board located close to the drilling point ensures convenience of operation, GETECH Rigs require minimum maintenance and easy to operate.

Technical Data

Description	Core Drilling Rig – TC – 40	Blast Hole Drilling Rig – TBH – 40	Borewell Drilling Rig – TBW - 40
Capacity Drill hole Dia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth	76 mm (Core Dia.:54mm) 150 Ft. -------- --------	4.5” 150 Ft. 6.0” 150 Ft.	4.5” 500 Ft. 6.5” 150 Ft.
	(Under favorable drilling conditions)
Hydraulic System a) Prime Mover b) Feed Pull up Force Pull Down Force Pull Down Speed Pull up Speed c)Rotation Speed Torque Optional Two speed R.H.	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf 0-450 rpm 30 Kgf 0-60 rpm 225 Kgf	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf -------- --------	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested	-------	450 CFM & 150 PSI	500 CFM & 200 PSI
Rod Changer	---------	Single Rod Changer	Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting	75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive	--------	36 LPM @ 28Kgf/cm² Hydraulic
Hoist:	2.5 Tons @ 30 mtrs/min	---------	--------------

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

SELF PROPELLED SIKD MOUNTED RIG

MULTIPURPOSE CORE DRILLING RIG, WATER, BLAST HOLE DRILLING

waterwellrigs PROPELLED SIKD MOUNTED

Technical Specifications

Description	Core Drilling Rig - TC - 40	Blast Hole Drilling Rig - TBH - 40	Borewell Drilling Rig - TBW - 40
Capacity Drill hole ia. Drill Depth Over Burden Drill Dia Over Burden Drill Depth	76 mm (Core Dia.:54mm) 150 Ft.------------	4.5” 150 Ft. 6.0” 150 Ft.	4.5” 500 Ft. 6.5” 150 Ft.
	(Under favorable drilling conditions)
Hydraulic System a) Prime Mover b) Feed Pull up Force Pull Down Force Pull Down Speed Pull up Speed c)Rotation Speed Torque Optional Two speed R.H.	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf 0-450 rpm 30 Kgf 0-60 rpm 225 Kgf	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf -------- --------	Tractor Engine 4500 Kgf 2300 Kgf 30 m/min. 24 m/min 0-450 rpm 30 Kgf --------- ---------
Compressor: Min Suggested	--------	450 CFM & 150 PSI	500 CFM & 200 PSI
Rod Changer	--------	Single Rod Changer	Single Rod Changer
Water Pump : Capacity Suggested min. Drive & Mounting	75 LPM @ 35Kgf/cm² Trailer Mounted Separate Engine Drive	-------- --------	36 LPM @ 28Kgf/cm² Hydraulic
Hoist:	2.5 Tons @ 30 mtrs/min	--------	--------

Send Mail